EMPIRE
ENVIRONMENTAL
Contamination Assessments, Environmental Audits, Environmental Site Assessments
 
Site Navigation
HOME
ABOUT US
SERVICES/QUOTES
   Florida
   Southeast US
EMAIL US
   
Contact Information
  EMPIRE
ENVIRONMENTAL
 
2935 SE Gran Park Way
Stuart, FL 34997
and
  312 Summit Drive, 1st Floor
Liberty, SC 29657
 
Phone:
800.344.1087 - Toll Free
772.287.0529
  Fax:
772.220.6619
   
   

Phase II Environmental Site Assessment
Auto Repair and Paint & Body Shops

 
 Request A Quote

Testing associated with Automobile Repair Shops should include:

  1. Soil and groundwater testing in pervious areas that are susceptible to surface discharges or show evidence of soil staining or stressed vegetation for components associated with petroleum and solvents.
  2. If floor drains and an oil/water separator or a septic tank are present, the drainfield or point of discharge from the oil/water separator or septic tank should be tested for petroleum and solvent compounds.
  3. If in-ground hydraulic lifts are present, and there is evidence that any lifts had been or are currently not functioning correctly, the soil and groundwater below the lift structure and reservoir should be tested for petroleum and PCB's.

Testing associated with Paint & Body Shops should include:

  1. Soil and groundwater testing in pervious areas that are susceptible to surface discharges or show evidence of soil staining or stressed vegetation for paint wastes including Acetone, Lacquer Thinner and other industrial solvents.
  2. If floor drains and an oil/water separator or a septic tank are present, the drainfield or point of discharge from the oil/water separator or septic tank should be tested for petroleum and solvent compounds.
  3. If paint booth filters are not properly maintained, soil and groundwater near the exhaust outlet should be tested for solvents and metals.
  4. If in-ground hydraulic lifts are present, and there is evidence that any lifts had been or are currently not functioning correctly, the soil and groundwater below the lift structure and reservoir should be tested for petroleum and PCB's.

 Request A Quote